Rear View Safety
14
•
Do a hard reset, unplug all cables
and power cables, leave out for 1
minute and then re-connect them
•
Check to ensure that the
connection to the camera is tight
•
Verify camera cable is plugged into
port labeled Backup Camera
•
Verify that the green positive
trigger on power harness is put to
power 12v+
•
Verify camera is on correct camera
input
•
Verify cable is connected to
monitor
•
Verify camera is connected to
cable
•
Connect known working camera
and cable to monitor
•
Verify Green trigger is receiving
power
No Image On Screen
TROUB
LESHOO
TING
