While every effort has been made to ensure that the information contained in this guide is
accurate and complete,
ZHDVVXPHQROLDELOLW\
for any errors or omissions.
We reserve the right to change the specifications of the hardware and software described herein
at anytime without prior notice.
1RWH
ƹ
7KH596
does not recognize the people who have only one eye, white eyebrows, rough
scars or
wrinkles around eyebrows.
ƹ
7KHSURGXFWVVWRUDJHWHPSHUDWXUHLV
&a
ȱ
The working temperature in cab is
ǚ
a
ǚȱ
. If the cab temperature is below
ǚ
or above
ǚ
, the system
DXWRPDWLFDOO\EHFRPH
GRUPDQW
.
2
nce the cab
temperatures reaches the normal working temperature, it will start work
automatically again. If
the system has been working, it doesn't matter even if the temperature
decreases or increases.
Installation
1RWH:HUHFRPPHQGSURIHVVLRQDOLQVWDOODWLRQ
&RQQHFW
5 pin signal cable connect with power supply.
Pl
DFH
according to the part of
$9/
6\VWHP*36&RQQHFWLRQ
connect the 5 pin cable of host with 5 pin signal cable.
Install the device
on
the
dashboard
GLUHFWO\
in front of the driver. The degree between the
installation location and the
driver’s normal driving position should be within 20
.
7KH
596
can be fixed on uneven
surface as long as the camera is trained on the driver’s face.
Tear the protective film from suction cup of bracket, put the host on the holder (If choose
simple sticker bracket, please omit this step) Tear red sticker of holder’s bottom, put the host on
optimal position of dashboard. Train the lens on your face and adjust the position of the
lens
according to the state of the green light. Do not block the main display parameters of the
instrument panel.
The host connected with bracket, the lens must be installed vertical. Bracket can be adjusting
the height from screw on the right side. Bracket has two universal
DGMXVWDEOH
balls
The lens
must be installed vertically. That means the green light and the
center of the lens remain
vertical. Don’t press the double-sided adhesive tape too firm at
first, so
DQ\
inappropriate
position
LQJ
can be
HDVLO\
re-adjusted
To test installation, sit
normal
O\
in the
YHKLFOH
, if the green light of the camera
is bright or
flashing
WKLVLQGLFDWHV
that the driver
VH\HVKDYHEHHQGHWHFWHG
The distance from lens to the
driver's eyes should be between 60cm-90cm.
:
hen the driver are
looking at the front and the
green light
VWD\V
bright,
LWLVSURSHUO\LQVWDOOHG
Adjust the correct position of the camera
VR
the
green light can keep on
as far as possible.
$I
lashing green light is normal wh
HQ WKH
driver
open
VWKHLU
eyes, especially for driver
V
wearing rimmed spectacles.
,IW
he dashboard of truck and bus is low, install
WKH596DWD
higher position
7
he host
should not be higher than the driver’s eyes and the angle between the installation
location
and the driver’s eyes should not
H[FHHG
30
.
The distance from lens to the driver's eyes should be between 60cm-90cm. For some cases,
Содержание Rear View Safety RVS-350
Страница 1: ... 3 7 3 5 6 0 503 4 45 263 6TFS BOVBM ...