Safe Fleet Prime Design VRR3-FT31G-ST, Руководство по сборке

Страница: 5 / 12

PRIME DESIGN, A SAFE FLEET BRAND
▪
Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118
▪
Toll Free: 1.8.PRIME.RACK
▪
Fax: 651-552-1799
▪
Email: info@primedesign.net
▪
Website: www.primedesign.net
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
5
VRR-FT31G-ST BO
X
ASSEMBL
Y INSTR
UCTIONS–RO
TA
TION DEPLO
YMENT
Starting with the Left Hand Rotation, use the 6 point
13MM socket, and loosen the four Barrel Nuts in
positions “A” two full turns counterclockwise.
0.1
ROTATION DEPLOYMENT
Installer’s Note: The Rotations on this Ship Thru rack are factory-
mounted inboard of the Crossbar ends. They must be repositioned to
the Crossbar’s end stops for proper operation and use.
A
A
A
A
Grasp the Drive Shaft in the shaded areas, then evenly pull the
Rotation outward to a hard stop.
0.2
B
B
B
B
Using the 6 point 13MM socket and a torque wrench, tighten
the Barrel Nuts loosened during Step 0.1 to 150 in-lbs.
0.3
Repeat Steps 0.1–0.4 for
the Right Hand Rotation.
0.5
0.4
Press black caps into each Barrel Bolt hole marked positions
“B” on the Left Hand Rotation Base Assemblies.