Safe Fleet PRIME DESIGN VCC-226, Руководство пользователя

Страница: 8 / 16

PRIME DESIGN, A SAFE FLEET BRAND ▪ Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118
▪
Phone: 651-552-8554
▪
Toll Free: 1.8.PRIME.RACK
▪
Fax: 651-552-1799
▪
Email: info@primedesign.net
▪
Website: www.primedesign.net
TM & © 2018 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6764268, 6971563, 2364879, 8857689, 8511525, 8991889, 2271515, 2364897, 9506292, 9481313, 9481314, 9796340, 6202807, 6427889, 9415726 AND OTHER PATENTS PENDING
8
VCC-226
ASSEMBL
Y INSTR
UCTIONS–RIGHT SIDE CLAMP DO
WN
6.2
Place the Clamp Down Handle into the large
hole in the Handle Ball. Position the Handle
so the Set Screw hole is aligned with that on
the Handle Ball.
6.3
Using an Allen Wrench, insert the
Handle Set Screw through the Tube Ball
and into the Handle. Torque to 55 in-lbs.
CLAMP DOWN TUBE SPLICE
7
Slide the Tube Splice onto the
Rear Clamp Down Tube, but
do not tighten until Step 18
FRONT CLAMP DOWN TUBE
8.1
Align Clamp Tube tang
holes to Crossbar.