Safe Fleet PRIME DESIGN VBR-FT31B, Руководство пользователя

Страница: 10 / 12

PRIME DESIGN, A SAFE FLEET BRAND ▪ Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118
▪
Phone: 651-552-8554
▪
Toll Free: 1.8.PRIME.RACK
▪
Fax: 651-552-1799
▪
Email: info@primedesign.net
▪
Website: www.primedesign.net
TM & © 2019 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6764268, 6971563, 2364879, 8857689, 8511525, 8991889, 2271515, 2364897, 9506292, 9481313, 9481314, 9796340, 6202807, 6427889, 9415726 AND OTHER PATENTS PENDING
10
Small Cap
Large Cap
13
14*
15
LEFT SIDE ASSEMBLY SEQUENCE
VBR-FT31B
ASSEMBL
Y INSTR
UCTIONS–LEFT SIDE B
ASE
CROSSBAR CAPS LADDER STOPS
13.1
13.2
14.1
14.2
Loosen the nut to allow
the End Stop to slide into
the Crossbar groove
Position the Ladder Stop to
the desired location, then
torque the nut to 90 in-lbs.
NOTE: Some Front Crossbars may
have additional drilled holes. Press
Crossbar Caps into Crossbar holes if
present and unused.
* NOTE: Crossbars may not have Caps installed
from the factory. If factory-installed, proceed to
Step 13 and ignore Step 14. If not installed, Caps
will be included in the Hardware Kit. Press them
into the Crossbars as shown in Step 14.