Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
4
UVX-201
ASSEMBL
Y INSTR
UCTIONS–MOUNTING
TO UTILITY BOD
Y
96.00”
10.00”
10.00”
Rear Lower
Front Lower
10.00”
Rear Lower
Front Lower
84.00”
10.00”
72.00”
10.00”
10.00”
Rear Lower
Front Lower
Brace Area
Brace Area
Brace Area
16.375”
MOUNTING DIMENSIONS
Mounting to Service Body: dimensions are dependent
upon Crossbar distances of 6’-8’ plus allowance for
the Mount Brace from the front of the Utility Rack.
Allow spacing for the Mount Brace, but do not drill
or install until Step 9.
0.2
6.00 Ft: Drill holes into the Service Body mounting
location according to dimensions shown.
0.1
8.00 Ft: Drill holes into the Service Body mounting
location according to dimensions shown.
0.3
7.00 Ft: Drill holes into the Service Body mounting
location according to dimensions shown.
