Safe Fleet Prime Design PRR 0005, Быстрый старт

Страница: 5 / 16

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2021 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608, 10501022 AND OTHER PATENTS PENDING
5
M8 x 65mm Bolt
Flat Washer
Flat Washer
M8 Lock Nut
Left Front
Right Front
Left Rear
Right Rear
M8 x 30mm Bolt
M8 x 65mm Bolt
Flat Washer
Fender Washer
Neoprene Washer
M8 Lock Nut
0.1
Assemble the Braces to the Mounting Brackets using the
specified hardware as shown below.
Torque all Mounting Bracket
bolts to 90 in-lbs
0.4
Loosen all indicated Nuts to
install the Crossbars. Do not
tighten until Step 1.2.
0.5
0.2
Verify correct positioning and location of Mounting Brackets to
utility body prior to installing hardware.
PRR-0005
ASSEMBL
Y INSTR
UCTIONS–FBM MOUNTINGS 0.3
Install the Mounting Brackets using the specified hardware as
shown below.