manualshive.com logo in svg

Safe Fleet Prime Design ProMaster FBM-1007-BLK, Руководство по сборке

Поделиться
Скачать
Safe Fleet Prime Design ProMaster FBM-1007-BLK Скачать руководство пользователя страница 13

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability 
(the “Prime Design Limited Warranty”). 

▪

 TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING

13

Rear

Front

3A

1

2

FBM-1007-BLK 

ASSEMBL

Y INSTR

UCTIONS–L2H2 UNIVERSAL FBM

L2H2 (136.00”) FBM ASSEMBLY SEQUENCE–ALURACK ONLY

CHANNEL MOUNTINGS

Slide all Mounting Bodies 

onto Base Puller Assembly

1.2

Position Base Pullers and 

Nut onto Roof Mounting Boss

1.1

NOTE:

 Channel Mountings must be 

disassembled for installation onto the 

vehicle’s roof.

NOTE: Base, Rotation, Crossbar, and Side Rail features are shown for 

illustrative purposes only. These features are not included with this Base 

Mounting Kit, and must be purchased separately.

ALURACK ONLY

CONFIGURATION

Содержание Prime Design ProMaster FBM-1007-BLK





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды