Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
4
USAM-OCM3032-US01 Rev-A 0220
Variable Placement
Flush to end
OCM-3032
ASSEMBL
Y INSTR
UCTIONS–ASSEMBL
Y INSTR
UCTIONS
ADD-ON CROSSBAR INSTALLATION
3
Install Mounts into Channels
as shown below.
4.1
Set Crossbars into the Mounts
as shown and torque Crossbar
Connector Hardware to 90 in-lbs.
Attach Ladder stops as shown
and torque to 90 in-lbs.
4.2
5
Set to distances as shown below, and torque all Removable Crossbar Mounts into the Channels at 90 in-lbs.
NOTE: Channels and FBM are shown for reference. Specific channels and configurations are determined by
Service Body size.
