Safe Fleet PRIME DESIGN FBM-1014-BLK, Руководство пользователя

Страница: 4 / 8

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
4
Rear
Front
Crossbar Rear Crossbar Front
1.25”
72.00”
ErgoRack & AluRack
Rear
Front
FBM-1014-BLK
ASSEMBL
Y INSTR
UCTIONS– L2H1 UNIVERSAL FBM
2.2
Set to distances shown below. Do not torque the Crossbar
Mounting Brackets until Steps 3.3–3.4. Finger-tighten them
into designated dimension to hold them in place, then proceed
to your Feature (FEA) Assembly Manual.
MOUNTING BRACKETS
Do not mount the Crossbars to this FBM system at this time.
Refer to the respective FEA or AR Assembly Manual(s)
included with your chosen rack configuration features.
Depending upon the features chosen, you may need to
perform a complete feature assembly onto the Crossbars or
Side Rails as noted in that feature’s Assembly Manual.
WARNING: Failure to position the Crossbars as shown in this
FBM Assembly Manual may result in damage to the sliding
door and/or ladder rack.
NOTE: Crossbars, Side Rails, Base, Clamp Down, or Rotation
features are not included in this FBM kit, and must be
purchased separately. To purchase applicable features and
accessories, please contact your authorized distributor, or a
Prime Design Sales & Service Representative.
MOUNTING BRACKETS
2.1
Loosen the bolts indicated below, then slide Crossbar
Mounting Brackets into each of the Channels, and attach
the Channel Caps
Loosen these bolts