Safe Fleet PRIME DESIGN FBM-1013-BLK, Быстрый старт

Страница: 3 / 8

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2021 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608, 10501022 AND OTHER PATENTS PENDING
3
M8 Lock Nut
Flat Washer
Rear
Front
T Bolt Stud
1
2
3E
Foam Pad
Mounting Bracket
*M6 x 25MM Bolt
* Only one
bolt required
Sealing Washer
Mid
Front
Rear
Flat Washer
1
2
3A
L1H1 FBM ASSEMBLY SEQUENCE
FBM-1013-BLK
ASSEMBL
Y INSTR
UCTIONS–L1H1 CHANNEL MOUNTING
MOUNTING BRACKETS
Install the Channel Mounting Brackets into the vehicle’s
roof mounting holes and torque to 90 in-lb.
1
CHANNELS
2.1
Apply Anti-Seize to all M8 T Bolt studs, then attach the
Channels to the Mounting Brackets using the indicated
hardware. Do not tighten until Step 2.2
NOTE: Install Hardware
into the lower mounting
holes for rear and middle
Brackets, and the upper
mounting hole for the
front Brackets
NOTE: Base, Rotation, Crossbar, and Side Rail features are shown for
illustrative purposes only. These features are not included with this Base
Mounting Kit, and must be purchased separately.
ERGORACK
CONFIGURATION
ALURACK
CONFIGURATION