Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2021 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608, 10501022 AND OTHER PATENTS PENDING
7
Center
7.50”
Vehicle
Rear
Vehicle
Front
Do not mount the Crossbars to this FBM system at this time.
Refer to the respective FEA or AR Assembly Manual(s)
included with your chosen rack configuration features.
Depending upon the features chosen, you may need to
perform a complete feature assembly onto the Crossbars or
Side Rails as noted in that feature’s Assembly Manual.
WARNING: Failure to position the Crossbars as shown in this
FBM Assembly Manual may result in damage to the sliding
door and/or ladder rack.
NOTE:
Crossbars, Side Rails, Base, Clamp Down, or Rotation
features are not included in this FBM kit, and must be
purchased separately. To purchase applicable features and
accessories, please contact your authorized distributor, or a
Prime Design Sales & Service Representative.
CROSSBARS (ALURACK L3/L4)
Shown with L4H2 AluRack
for illustrative purposes only
2A.1
CROSSBAR
ADJUSTMENT
2A.3
Verify the specified
distance from the
ends of both Mounting
Bracket to the ends of
both Channels.
2A.4
Torque all Crossbar Mounting
Bracket bolts to 90 in-lbs at
this time.
FBM-1009-BLK
ASSEMBL
Y INSTR
UCTIONS–ALURA
CK L3/L4 MOUNTING
2A.2
Torque all of
these Crossbar Clamp
nuts to 90 in-lbs.
