Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2021 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608, 10501022 AND OTHER PATENTS PENDING
3
CSU-3210
SERIES ASSEMBL
Y
INSTR
UCTIONS–UPRIGHT ASSEMBL
Y
SHELVING ASSEMBLY SEQUENCE
For shelving requiring three supports: Remove the upper
and lower latches from the middle support as shown.
For the remainder of the manual unless otherwise noted,
the instructions will apply to all supports.
NOTE: For truck bodies that have an E Track or other
equipment installed onto the interior walls, a spacer will
need to be created in order to align the uprights and
shelving correctly.
Install a Retain Ring on one side of each
Hinge Pin (4 total per Upright).
0
1
Install a Hinge Pin and Retain Ring in the holes
shown below.
2
Attach upper Shelving to the supports as shown.
3
Align holes
