Safe Fleet Prime Design CSU-3014, Сборка

Страница: 3 / 8

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2021 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608, 10501022 AND OTHER PATENTS PENDING
3
ASSEMBLY REQUIREMENTS
CSU-3014-3015 ASSEMBL
Y
INSTR
UCTIONS–REQUIREMENTS
SHELVING ASSEMBLY SEQUENCE
Install a Retain Ring on one side of each
Hinge Pin (4 total per Upright).
1
Install a Hinge Pin and Retain Ring in the holes
shown below.
2
• These instructions are subject to change if the manufacturer revises
the parts and/or production of the subsystems and accessories used in
the brand’s vehicles. Following the instructions for assembly will ensure
proper installation of the product. The manufacturer will not be held
liable if these instructions are not followed.
•
The addition of parts and/or components not original to this Cantilever
Shelving are discouraged. Use only OEM supplied parts.
• Consultaion of the OEM vehicle may be required during assembly to
avoid vehicle damage. Ensure bolt locations will not damage any
critical parts of the vehicle–i.e. gas tank, wiring harnesses, or
hoses-before drilling.
INSTALLER NOTE: It is important to correctly follow
these assembly instructions. These instructions for
assembly are provided by the manufacturer at time of
Cantilever Shelving delivery, and reflect the technical
specifications applicable at the time of writing.
Torque Wrench w/13MM Socket
“E-Style” Retaining Ring Applicator Tool
Plus Nut Applicator Tool
REQUIRED
RECOMMENDED