Safe Fleet Prime Design CSM-1001 Series, Руководство по сборке

Страница: 5 / 8

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2021 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608, 10501022 AND OTHER PATENTS PENDING
5
Incorrect Channel Orientation
Flat Washer
Lock Washer
M8 x 18MM Bolt
Corrrect Channel Orientation
Flat Washer
Lock Washer
M8 x 25MM Bolt
Flat Washer
Caddy Mounting Spacer
Lock Washer
M8 x 25MM Bolt
Attach the Interior Mounting Assembly with Hardware as
shown into the factory tie in hole. Torque to 90 in-lbs.
Install the Mounting Channel in its correct orientation
using Hardware as shown. Torque to 90 in-lbs.
2.1
3.1
Install Hardware into the lower Mounting Assembly hole
as shown. Torque to 90 in-lbs.
Repeat Steps 1.1–3.1 on all parts
and hardware as needed for your
specific configuration.
2.2
3.2
Lock Washer
M8 x 25MM
Flat Washer
Uprights (sold separately) are installed into CSM-1001
according to your specific configuration. Torque hardware
to 90 in-lbs.
4
*Hardware used in Step 4 is from HKT-0204
contained in Upright packaging CSU-3001 or
CSU-3002 (sold separately).
NOTE: View below is shown with shelving removed
for visual clarity.
CSM-1001 SERIES
ASSEMBL
Y INSTR
UCTIONS