Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2021 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608, 10501022 AND OTHER PATENTS PENDING
4
M8 x 70MM
M8 Locknut
Clamp Connector
” Flat Washer
Fit as shown in Crossbar
and Connector Grooves
Install the WorkPro Light with the attached
Top Connector onto the Crossbar and Clamp
Connectors using the hardware shown.
Finger-tighten only until step 3.2.
2
Torque Clamp Hardware to 90 in-lbs.
3.2
Adjust to desired positioning.
NOTE: If installing more that one WorkPro
Light and Mount, repeat Steps 1-2 and
position as needed.
3.1
ASH-8035 ASSEMBL
Y
INSTR
UCTIONS
USAM-ASH8035-US01 Rev-A 0219
MOUNTING LIGHT TO CROSSBAR
ADJUSTMENTS
CONTENTS OVERVIEW
