Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2021 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608, 10501022 AND OTHER PATENTS PENDING
6
A
B
1
2
3
4
5
2
3
4
5
AAL-8008
ASSEMBL
Y INSTR
UCTIONS–A
CCESS LADDER
ACCESS LADDER INSTALLATION
Using a wax or grease
pencil, make marks at
the top (A) and bottom
(B) of the door at 4.50”
4.2
Starting at the inner door
seam (A and B), measure
horizontally outward
approximately 5.00”
4.1
INSTALLER NOTE:
For an accurate installation, it
is recommended the vehicle that is receiving this
ladder be sitting on as level of ground as possible.
4.3
Hang the Ladder’s Upper
Door Brackets onto the top
of the door, ensuring the
rubber isolators fully seat
onto the door’s edge.
4.4
4.5
Turn the nut to draw the
Lower Hanger Rod upward
until the Door Bracket is
lightly snug. Do not tighten
until Step 4.8
