p.2
p.3
Fold Here
Camera Description
1
2
3
4
8
7
6
5
1. LED Indicator.
- Solid Red: Device is powered on
- Solid Green: Device communicating
2. Lens
3. Front Cover
4. Mounting Base
5. Mic
6. IR LED
7. Camera Enclosure
8. Network Cable
Mounting the Camera
1. Prepare the mounting surface
2. Loosen the two screws on the camera cover and
remove the camera cover.
3. Using the supplied template, mark the mounting
area and drill holes in the surface.
4. Direct the cable through the silicone pad, silicone
stopper, and the wall.
5. Align the silicone stopper to hole A of the drill
template. Mount the camera on the surface
using the proper mounting screws. Rivnuts
with #8 machine screws with lock washer are
recommended when mounting camera on exterior
of vehicle.
6. Loosen the adjustment screw and adjust the
camera to the desired surveillance angle. Tighten
the screw to secure the desired position.
Side View
Access Camera Online
You can access and configure the camera settings using the Camera Web Browser
via Internet Explorer. Only one camera can be accessed at a time, and Active X
controls must be enabled.
1. Enter the camera IP address and press
Enter
.
2. Enter the user name and password. Default login is:
• user name:
admin
• password:
1234
3. Click
Login
. The Basic Configuration window displays.
4. Change the IP address to the required value and click
Apply
to save settings.
7. Place the camera cover over the camera and fasten
using the cover screws.
8. When camera is installed on the exterior of vehicle,
always use the Twist Lock Weather Pack connector
housing on the RJ45 cable that mates to the camera to
protect the cable connection from corrosion.
Web browser functions
•
Live View:
View live video (IE v11, Safari v5.1.7). Change aspect ratio, stream to
view and plugin to play the video.
•
Basic Configuration:
Adjust IP settings, stream parameters, image, overlay, day/
night IR settings and preview video.
•
Advanced Configuration:
Firmware upgrade, restore defaults, manage users, setup
time, tamper event.
•
Quick Status:
View camera model, serial number, firmware version and IP address.
•
Logout:
Click to log out of the system
•
Apply:
Click to save changes.
Silicone Stopple
Silicone Pad
