![Safe Fleet LMU Controller Скачать руководство пользователя страница 13](http://html1.mh-extra.com/html/safe-fleet/lmu-controller/lmu-controller_installation-manual_3250654013.webp)
LMU Controller
© Safe Fleet | March 2019 | All rights reserved | Part #: 700-1132 R3
p. 13
Troubleshooting
Troubleshooting
This section provides information and procedures for troubleshooting the LMU Controller interface and the vMax Live Plus
software.
Troubleshooting
Symptom
Possible Cause
Solution
LMU Controller will not start
The power cabling may not be
completely connected.
Check cabling connections.
LMU Controller is not detected by
vMax Live Plus
The GPS sensor cannot detect the
satellites.
Move the vehicle out of garage.
The cellular connection is not
complete.
Check with Seon Technical Support.
LMU Controller LEDs are on up to 15
minutes after ignition off.
The LMU Controller is factory set to have a power off delay of 15 minutes to
allow for cellular transmission delays in communicating vehicle activity after the
vehicle reaches the yard and powers down.