Aim the Camera
To get the required video image, adjust the camera‘s rotation, pan, and tilt
settings using the adjustment controls and the DVR monitor video output.
Rotation
: depending on how the camera is mounted, grip the tilt
screws and rotate the camera assembly to ensure the camera shows
a level view.
Pan
: grip the camera gimbal while holding a finger or thumb against
the tilt screwmount and twist it to find the required view.
Tilt
: loosen the tilt adjustment screws until the camera can tilt.
Tighten the tilt screws after adjustments are complete.
Do not adjust tilt after tightening screws.
Do not adjust any other screws.
Close the Camera
1.
Replace the dome and bezel on the camera assembly.
2.
Use the supplied Torx key to tighten the security screw on the
camera bezel.
Specifications
Routine Maintenance
Most liquid cleaners or graffiti gel can be used to clean your camera
enclosure. Do not use abrasive cleaners that can scratch the window and
reduce visibility of the camera.
If the window in your camera is damaged or scratched beyond use, order
a replacement window from your camera distributor.
Replacing a Damaged Dome
1.
If the camera dome is damaged or scratched, order a replacement
bezel and dome assembly from your camera distributor.
2.
To remove and replace the bezel and dome, follow the steps in
Open
the Camera Assembly
and
Close the Camera
.
Service & Support
If your CMD Exterior Dome Camera is to be returned for service, please
contact the Safe Fleet Technical Support team, provide the model and/or
serial number of your unit, and ask for a Return Merchandise
Authorization (RMA) number.
An RMA number allows the support team to better track your product
when it comes in for service. Please show the RMA number on the
outside
of the package.
ANY PRODUCT SENT TO SAFE FLEET WITHOUT AN RMA NUMBER
MAY BE REFUSED!
Documentation & Warranty
Additional copies of this guide, along with other documentation and the
product warranty can be found on the Safe Fleet Community Web site:
https://community.safefleet.net
Technical Support
2002/96/EC (WEEE directive): This product cannot be disposed of as
unsorted municipal waste in the European Union. For proper recycling,
return the product to your local supplier upon the purchase of equivalent
new equipment, or dispose of it at designated collection points, for more
information, see www.recyclethis.info.
2006/66/EC (battery directive): This product does not contain batteries.
Power Consumption
1.68 W (Max)
Operating Voltage Range
7 to 18 VDC (powered by DVR)
Operating Temperature Range
- 4 to 158°F (-20 to 70°C)
Horizontal resolution
800 TV Lines
Enclosure Size
Diameter: 3.125” (80 mm)
Height: 2.625" (67 mm)
Enclosure Material
Solid aluminum alloy
Connector Cable Length
12” (30 cm)
Phone:
1.844.899.7366
(Mon.-Fri., 7:00am-7:00pm EST)
Email:
