8916-37: 2 of 2; 04/02
Safco Products Company, New Hope, MN 55428
Lift the A Rear Panel over the B Left Side Panel.
Align the holes in the edge of the Rear Panel (next
to the Cams F ) with the G Screw Posts on the
rear edge of the Left Side Panel. Slide the Rear
Panel down onto the Screw Posts, and fasten by
turning each of the cams clockwise until they stop.
IMPORTANT:
to prevent possible damage during
assembly, support the Back Panel in the upright
position.
2
Now slide the D Shelf over the center Screw Posts
of the Left Side Panel (making sure the Locking
Cams are still facing the edge), with the Cam side
toward the bottom of the Side Panel and the long
unfinished edge toward the Back Panel. Secure the
Cams as in step 2.
3
Carefully position the C Right Side Panel over the
Rear Panel and Lower Shelf. With the arrows on the
Cams pointing toward the Screw Posts, slide the
Screw Posts on the Right Side Panel down into the
edge holes, and tighten all Cams as before.
4
Position the unit with the slanted end upward. With
the pencil groove toward the rear of the unit, slide
the Screw Posts on the E Top down into the edge
holes, and fasten the remaining Cams.
5
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
B
A
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
D
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
UNFINISHED
EDGE
Q
Q
Q
Q
Q
C
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
E
Q
Q
Q
Q
Q
PENCIL
GROOVE
BOTTOM
BACK
EDGE
F
G
