Connect optional add-on upper posts to lower posts
using step 1. Install half-sleeves for bottom add-on
shelf, refer to step 2. Insert posts into short side of add-
on shelf referring to steps 3 and 4. Slide two E S-
Connecting Hooks onto each front frame of starter unit
shelves. Position hooks at least 12 inches apart.
5291-37: 2 of 2; Rev. 1; 12/99
Safco Products Company, New Hope, MN 55428
5
Snap half-sleeve sets onto all four posts at desired
height for next shelf. Lower next shelf into position
and press until fully seated. Install third and fourth
shelves in the same manner, with both shelves
mounted ABOVE the post seams.
Q
Q
Q
Q
Q
6
SHELF
POST
SEAM
HALF-
SLEEVES
HALF-
SLEEVES
S-HOOKS
Snap half-sleeve sets onto add-on posts at same
height as next shelf on starter unit. Lower the
next shelf into position with the shelf frame of the
non-post side on the S-hooks. Press corners
near half-sleeves until fully seated. Install the third
and fourth shelves in the same manner.
7
8
Set the unit into place and adjust the
levelers at the bottoms of the posts until
shelves are level in both directions.
STARTER
UNIT
STARTER
UNIT
HALF-
SLEEVES
Connect add-on shelf to
corresponding shelf on main unit
using two S-Connecting Hooks per shelf.
S-HOOKS
ADD-ON
UNIT
Add-on unit can be attached to
end of starter unit if desired.
