PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 6 minutes.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
NOTE: PLEASE USE ON/OFF TYPE"A" BULB MAX 60-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT THERE IS LED 9-WATT BULB IN THE BOX
Step1
:Make sure all parts could be aligned before
assemble .Do not rotate lamp body too hard avoid base
screw broken.Separate the hexagon nut(J) and Parts(I)
from lamp base(B) by using wrench(H).
Screw the Lamp body (A3) onto the Lamp body(A4).Screw
the Lamp body (A2) onto the Lamp body (A3).Screw the
Lamp body (A1) onto the Lamp body (A2).Screw the
Parts(I) onto the Lamp body(A1).Screw the lamp base (B)
onto the Parts(I).
Screw the tooth washer(G) onto the lamp base(B).Screw
the Hexagon nut(J) onto the Parts(I) with wrench(H),and
tighten securely.Be careful not to twist the power cord
and tighten securely.
Step2:
Put the shade(D) on the socket (C).Screw the ring(E)
on the socket (C).Insert the bulb(F) into the socket(C) .
Step3:
Put the light on a level surface to check if
everything is stable.
2/2
