12
10
90
°
STEP11
: Assembly is complete.
STEP9
: Peel the back paper of Bumper (HW13) then 2 pcs on
Frame Door Le�,1 pc on Frame Door Right, posi�on as shown
in the figure. Hold the frame door with posi�on of the upper pin
shown in facing upward. Put the frame door by inser�ng it to the groove
sliding track on Bo�om Board (1), Bring the upper Frame Door closer to
the Top Board, push down the insert pin to enable inser�ng
the Frame Door to Top Board un�l you hear ‘Click’ sound and
door has been securely installed.
Repeat this step for the other door.Slide the doors to right and le�
ensuring the doors has been placed properly in the provided track.
STEP10
: Use Wedge (HW12), Screw M 3.5 x15.5 (HW10) to �ghten
the back of media stand by using screwdriver. Please align the top board
and bo�om board in 90
O
posi�on against the side board, before securing
the wedges (HW12).
Place your furniture on level floor. The legs come with
adjustable leveller,adjust it as needed un�l your furniture
sit steady on the floor.
13
15
1
2
16
15
