1
2
10
11
12
8
9
F
F
7
F
±2 mm
19
18
17
16
STEP5
:Install the prepared Leg (HW19). Ensure the Corner Brace
(HW16) hooks onto the hole of Support Metal Leg (HW17) and (HW18).
Screw in just enough to grip the support using Allen Key (HW6).
Do not fully �ghten. Repeat for the other legs
STEP6
: Install assembled leg unit from Step 5 onto main assembled
unit by inser�ng Screw (HW14). Tighten with Allen Key (HW6). Then
�ghten all the Screw on the 4 corner brace of the assembled leg unit.
STEP7
: Insert Sliding Top (HW10) and Sliding Bo�om (HW11) using
Screw M3.5x13mm (HW12) into Door (F). Tighten with a screwdriver.
Use Screw M4x22mm (HW9) to a�ach Handle (HW8)
to the Door.
Step8
: Peel the back paper of Bumper (HW7) then 2 pcs on
Door posi�on as shown in the figure. Insert the Sliding Top (HW10)
pin into the groove line of Top Board. Posi�on the Sliding Bo�om (HW11)
into the grooved sliding track. Adjust gap of the door, by scroll the bu�on on
Sliding Roller (HW11). Follow the down and up direc�on.
Slide the door to right and le� ensuring the door has been placed properly
in the provided track.
6
14
B
