WARNING
Serious or fatal crushing injuiries can occur from furniture tip over. To prevent tipover:
Install tipover restraint provided.
Place heaviest items in the lower drawers.
Unless specifcially desgined to accommodate, do not set TVs or other heavy objects on top of this product.
Never allow children to climb or hang on drawers, doors or shelves.
Never open more than one drawer at a time.
Do not defeat or remove the drawer interlock system.
Use of tipover restraints may only reduce, but nto eliminate, the risk of tip over.
PIECE
QUANTITY
H3
2 PCS
H4
2 PCS
H5
2 PCS
H6
2 PCS
Anti-Tip Kit
Part List and Hardware List
DESCRIPTION
PICTURE
Nylon Strap
Long Screw
M4*25mm
Plastic Screw Anchor
Wall Bracket
1. Mark the location on the wall for mounting the second bracket "H6". Drill a 1/4 inch hole in the wall and insert the plastic screw anchor "H5".
Secure the bracket to the wall using the long screw "H4".
2. Place the furniture so the bracket on the back edge of unit is lined with the bracket on the wall.
3. Lace the end of the nylon strap "H3" down through each of the bracket. Bring both ends together and slide the beaded end of the strap through the keyhole
shaped slot on the other end. Pull down on the beaded end until it snap-locks into the keyhole.
4. Check to make sure the strap is securely laced and locked to the brackets.
5. Complete!
Assembly Steps
