PREPARATION
STEP4
USE SCREW (H2) AND SECURE BOLTS TIGHTLY
STEP5
REPEAT STEPS 3-4 FOR LEG ( C) AS INDICATED IN
PICTURE ABOVE
STEP6
REPEAT STEPS 3-4 FOR LEG ( D) AS INDICATED IN
PICTURE ABOVE.
STEP2
INVERT LEG (B) AND ALIGN HOLE TO THREAD
OPENING OF TABLETOP (A)
STEP3
PUT THE WASHERS ON THE BOLT IN THE ORDER
SHOWN IN THE PICTURE
STEP1
PLACE TABELTOP (A) FACE DOWN ON A SMOOTH
SURFACE
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 8 minutes.
Tools Required for Assembly (included): Allen Key
STEP7
USE SCREW (H1) AND SECURE BOLTS TIGHTLY (THE TWO
THREAD OPENINGS ARE LOCATED PERPENDICULAR TO TABLE TOP).
SECURE ALL SCREWS TIGHTLY. THIS ITEM MAY REQUIRE PERIODIC
TIGHTENING
H2
H3
H4
H2 H3
H4
H5
