x 4
1
16
18
3
A
L
3
3
3
1
B
C
D
E
2 11
10
A
C
D
E
13
14
19
1
2
3
7
7
E
K
K
11
STEP1
: Insert Cambolt (HW1), Push Tool (HW16) and Screw 3.5 x 13 mm
(HW18) into Top Board (A), Insert Dowel (HW3) into Back Board ( L )
STEP2
: Insert Cambolt (HW1) into Bo�om Board Board (B),
Insert Dowel (HW3)into Center Board ( E ) ,Side Board Le� ( C )
and Side Board Right (D)
STEP3
: A�ach Side Board Le� (C) , Side Board Right (D), Center Board E)
into Top Board (A). Insert Camlock (HW2) then �ghten using screwdriver.
Put Screw Cup Long (HW10) over the screw on Side Boards (C) & (D),
and put Screw Cap Short (HW11) over the screw on Center Board (E).
STEP4
: First insert Dowel Big (HW13) into provided holes on
Center Board (E).Then Put Support Board Center (K) on both side and
secure with Screw M6x40 (HW14),Hat Nut (HW19).
Hold s�ll the Hat Nut (HW19) using Allen Key (HW7) while �ghten
Screw (HW14) using Allen Key (HW7).
19
7
14
7
Before beginning assembly of product, make sure all parts are present. Compare parts with
part contents list and hardware contents list.
If any part is missing or damaged, do not a�empt to assemble the product.
Es�mated Assembly Time: 60 minutes.
PREPARATION
