PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not a empt to assemble the product.
* Es mated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): Allen Key
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email
STEP 1 : CONNECT THE LEGS AND THE TOP OF THE
HEADBOARD USING THE METAL CONNECTOR ACCORDING TO
THE ARROW INSTRUCTIONS IN THE PICTURE
STEP 4 : REMOVE TOP DRAWER FROM ASSEMBLED UNIT. THEN
STRAP (HW7) WITH SHORT SCREW (HW5) TO THE UNDERSIDE
OF TOP PANEL ( A ) USING PHILLIPS HEAD SCREW DRIVER, NOT
INCLUDED. TIGHTEN COMPLETELY.
STEP 2 : PUT RING & BOLT INTO THE METAL CONNECTOR THEN
TIGHTEN IT USING ALLEN KEY.
STEP 5 : DETERMINE WHERE THE STORAGE UNIT IS TO BE
PLACED, THEN MARK THE POSITION ON THE WALL SO THE
WALL ANCHOR ( HW6 ) WILL ALIGN WITH THE STRAP ( HW7 )
ON THE BACK OF THE STORAGE UNIT. THE DRILL HOLE IN THE
WALL. PRESS WALL ANCHOR ( HW6 ) INTO THE HOLE.
STEP 3 : YOUR HEADBOARD IS READY.
STEP 6 : CONNECT STRAP (HW7) WITH LONG SCREW (HW4) TO
WALL ANCHOR (HW6) USING PHILLIPS HEAD SCREW DRIVER,
NOT INCLUDED. THIGHTEN COMPLETELY. THEN REPLACE TOP
DRAWER INTO ASSEMBLED UNIT.
C
HW1
HW1
HW2
HW3
B
HW1
HW1
HW6
HW4
A
B
A
B
HW7
HW5
A
HW6
HW6
HW7
