Step 1
Step 2
Step 3
Step 4
Step 5
Now insert the small end of Cylinder Column
(4) into Control Mechanism (3) and carefully
press downward with moderate force until it is
fully seated.
Attach Control Mechanism (3) to Seat
Assembly (1) with the arrow towards the
front of the chair, using four Washers (11)
and two Medium Screws(9),two Short
Screws(8).
FULLY TIGHTEN ALL SCREWS USING
ALLEN WRENCH
Connect the armrests(2) to seat(1) by using four Long
Screws(10) and four Screw Covers(12).
The chair is ok now.
ATTENTION: MAKE SURE ALL
SCREWS ARE FULLY TIGHTENED
BEFORE USING CHAIR
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents
list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Wrench
Insert five Casters (7) into Star Base (6),
push hard until you feel or hear the
Caster(7) snap into place. Insert the LARGE
end of Cylinder Column (4) with the
bellow(5) into the Star Base (6) and carefully
press downward with moderate force until it
is fully seated.
