Step 1
Step 2
Step 3 Step 3
Step 4
Step 5
Step 6
Insert five Casters (8) into Star Base (7),
push hard until you feel or hear the
Caster(8) snap into place. Insert the LARGE
end of Cylinder Column (5) with the
bellow(6) into the Star Base (7) and
carefully press downward with moderate
force until it is fully seated.
Attach Control Mechanism (4) to Seat
Assembly (2) with the arrow towards the
front of the chair, using four Washers
(12) and four Short Screws(9).
Assemble the Seat(2) to the Back(1) together,using four
Long Screws(11) and four Washers(12).
FULLY TIGHTEN ALL SCREWS USING ALLEN
WRENCH
Now insert the small end of Cylinder
Column (5) into Control Mechanism (4)
and carefully press downward with
moderate force until it is fully seated.
The chair is ok now.
ATTENTION: MAKE SURE ALL SCREWS ARE
FULLY TIGHTENED BEFORE USING CHAIR
Connect the armrests(3) to seat(2) by using four Long
Screws(11),two Medium Screws(10) and six
Washers(12).
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents
list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Wrench
