PREPARATION
* Before beginning assembly of product , make sure all parts are present . Compare parts with parts
* If any part is missing or damaged, do not a empt to assemble the product.
* Es mated Assembly me : 10 minutes
* Tools Required for Assembly (included): Allen key
contents list and hardware contents list.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email
STEP4
ATTACH TIP PROTECTOR INTO BACK OF TOP BOARD USING SCREW
The unit needs to be secured against wall using p an p kit.
Please Consult your local hardware store to get advice of appropriate screw and fischer
according to your wall type. Drill pre-holes on wall as shown in fig(1) for the p protector.
Repeat the step with same distance of both p protector a ached in step
Insert fischer to each hole on the wall using hammer.
Secure the Tip Protector using Screw.
Make a loop by inser ng the provided Fastener / Cable es into both p protector on wall
and on backside of product, with the grids surface facing inside of loop.
Fasten the cable es un l posi on of product as close as possible to wall.
Repeat on the other side.
Grids Surface
STEP6
The unit needs to be secured against wall using p an p kit. Please
Consult your local hardware store to get advice of appropriate screw and
Fischer according to your wall type.
Drill pre-holes on wall as shown in fig(1) for the p protector. Repeat
STEP7
the step with same distance of both p protector a ached in step. Insert fischer
to each hole on the wall using hammer as shown in fig(2) .
Secure the Tip Protector using Screw as shown in fig(3).
Make a loop by inser ng the provided Fastener / Cable es into both p
protector on wall and on backside of product, with the grids surface facing
inside of loop as shown in fig(4).
Repeat on the other side.
Fasten the cable es un l posi on of product as close as possibleto wall as
5
shown in fig(5).
