Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Attach Control Mechanism (4) to Seat
Assembly (2) with the arrow towards the front
of the chair, using four Washers (11) and four
Short Screws(9).
Insert five Casters (8) into Star Base (7), push hard until
you feel or hear the Caster(8) snap into place. Insert
the LARGE end of Cylinder Column (5) with the
bellow(6) into the Star Base (7) and carefully press
downward with moderate force until it is fully seated.
Assemble the Seat(2) to the Back(1) together,using
four Long Screws(10) and four Washers(11).
FULLY TIGHTEN ALL SCREWS USING ALLEN
WRENCH
Now insert the small end of Cylinder
Column (5) into Control Mechanism (4)
and carefully press downward with
moderate force until it is fully seated.
The chair is ok now.
ATTENTION: MAKE SURE ALL SCREWS
ARE FULLY TIGHTENED BEFORE USING
CHAIR
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents
list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Wrench
Connect the armrests(3) to seat(2)
by using six Short Screws(9) and six
washers(11).
