STEP 3:
Place the assembled wine rack into the leg frame (D)
from step 2.
PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): None
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email
STEP 1:
Align and insert the vertical panel (E) into the slot on
the horizontal panel (F).
STEP 2:
Align and fasten top panel (B) to leg frame (D) using long bolt
(HW2), lock washer (HW3) and flat washer (HW4), then tighten with
Allen wrench (HW5) (DO NOT TIGHTEN YET).
STEP 4:
Align and fasten the other leg frame (D) to top panel (B)
using long bolt (HW2), lock washer (HW3), flat washer (HW4)
and tighten with Allen wrench (HW5) (DO NOT TIGHTEN YET).
Remark: push the wine rack towards the bottom of leg frame
when assemble the other leg frame with top panel.
STEP 5:
Place the partially assembled table base upside down on soft
surface Align and fasten bottom panel (C) to leg frames (D) using long
bolt (HW2), lock washer (HW3), flat washer (HW4) and tighten with
Allen wrench (HW5). Press top (B) & bottom(C) panal. Tighten all
screws while pressing the Top (B) to bottom(C).
STEP 6:
Place the table on the floor. Align and fasten table top
(A) to table base using short bolt (HW1), lock washer (HW3),
flat washer (HW4) and tighten with Allen wrench (HW5).
Remark: push the wine rack towards the bottom (C) of leg
frame (D) when assemble the other leg frame (D) with top
panel (B).
E
F
B
D
HW2
HW5
HW3
HW4
D
C
HW5
HW2
HW3
HW4
HW5
HW1
HW3
HW4
A