PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen key
STEP1
OPEN THE ZIPPER ON THE UNDERSIDE OF
THE SEAT AND TAKE OUT LEGS AND HARDWARE
PUT THE WASHERS ON THE SCREW IN
THE ORDER SHOWN IN THE PICTURE
STEP2
STEP3
INSERT THE LEGS AND SCREW IN THE
BUT DON'T TIGHTEN COMPLETELY.
REPEAT
THE SAME STEPS FOR THE OTHER THREE LEGS
SCREWS.
STEP4
CLOSE THE ZIPPER ON THE UNDERSIDE OF
THE SEAT
STEP5
PUT THE BENCH UPRIGHT AND MAKE SURE
LEGS ARE LEVEL , THEN FIRMLY TIGHTEN
ALLEN KEY WHILE THE BENCH IS UPRIGHT
AS PICTURED ABOVE
(IF THE CHAIR WOBBLY, YOU
EASY ADJUST LEG BOTTOM PLASTIC SCREW)
ALL
SCREWS
CAN
WITH
HW2 HW1 HW3
B
B
B
B
B
B
B
B
A
A
HW4
The legs and hardware are located underneath the bench in the
zipper compartment.