B
Wall
1 2
3
4
5
1
2
3
4
5
HW5
HW5
A
A
Philips head screwdriver not included
HW1
HW3
HW3
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time:20 minutes.
Tools Required for Assembly : Allen key (included) & Phillips head screwdriver (not included)
4
3
2
1
HW2
HW4
Step 3
Straighten up the assembled
product.Following the installation
instructions of anti-tipping (HW5) to
fix the product in the wall by 2
straps. Assembly is completed.
Step 2
Attach 4*Legs (B) in the
corresponding position on the
underneath of Drawer (A) by
using Allen key (HW4) to lock
with 8*Hex Socket Bolt (HW2),
As picture.
Step 1
Open 2*doors, installed the
2*Handles (HW1) on the inside of
2*Doors respectively by using a
Phillips head screwdriver (not
included) to lock with 4*Phillips Bolt
(HW3).
P.S. How to remove and install the
drawer knob, please see another
assembly instruction.
Notice :
SET OF HANDLES, 4*LEGS and
HARDWARE BAG AT THE
BOTTOM OF THIS PRODUCT.
