SPECIFICATIONS
Description
SAFARI Tripod System
Weight kg (lb)
3.6 kg (7.9)(including soft case)
Payload kg (lb)
5 kg (11.0)
Bowl Diameter
55 mm ball levelling
Height Above Bowl mm (in)
114 mm (4.5)
Pan/Tilt System
Fluid dampening system
Camera Plate
Sliding camera plate
Attachment System
¼” screw with pin carriage
Leg Tube Material
Carbon Fibre
Max Height mm (in)
1439 mm (56.7)
Min Height mm (in)
234 mm (9.2)
Transport Length mm (in)
680 mm (26.8)
WARRANTY
This warrants that the safari tripod system supplied
will, under proper use, be free from defects due
solely to faulty material and workmanship for a
period of 1 year from the date of delivery. If part of
the equipment is found by us to be so defective, at
our option, we shall repair or supply a replacement
for such part.
The warranty on this document shall not apply if :
(I) the buyer has, without our consent in writing,
serviced, modified, repaired or otherwise subjected
the goods to technical attention by any person other
than our authorised representatives.
(II) defectiveness is due to neglect, misuse,
excessive heating, accidents, operation contrary to
instructions for use, or normal wear or tear or;
(III) where access to equipment is necessary,
the buyer has not permitted our authorised
representative full access.
It is the buyer’s responsibility when ordering to
ensure that the goods ordered conform to buyer’s
requirements.
www.safaritripod.com
Contact Details:
REM
PO BOX 696 ARTARMON NSW 1570
EMAIL: [email protected]
For further information on available parts
and accessories visit
