manualshive.com logo in svg

Safari motorhome TREK 2005, Инструкция по эксплуатации

Поделиться
Скачать
Safari motorhome TREK 2005 Скачать руководство пользователя страница 204

204 •  Section 5  --- Equipment 

TREK 2005

Operation:

The TracVision SF satellite system

requires a clear view of the southern
sky to receive satellite signals. Ideal
antenna site has an unobstructed view of
15º to 75º in the Southern horizon.

If the satellite antenna receives

intermittent signals, or cannot locate the
satellite, check around the motorhome
for objects that could be blocking the sig-
nal, such as trees, buildings, etc. The
satellite antenna must be located in the
selected satellite coverage area in order
to receive a signal.

To Watch the Satellite:

• Turn on the TV and tuner (if TV has a separate tuner). 
• Using the TV remote, Universal remote or manual TV controls select channel three. Ensure

the display is on the TV screen.

• Ensure the Satellite Receiver is on. 
• Ensure the Tracvision SF is on.

NOTE: 

As part of the startup process, the TracVision SF System will default to channel 200,

a program directory. This is the system's means of verifying that it has identified

and is tracking the correct satellite. Once channel 200 appears, wait at least another

30 seconds before changing the channel to ensure that the system has completed the

startup routine.

System Start-up:

• Upon power-up, the system performs a set of start-up routines.
• Antenna then searches for a TV satellite.
• After locating a satellite, the IRD data connection determines whether the satellite signal can

be decoded. If so, the antenna locks onto and tracks the satellite.

NOTE:

Once the startup procedure is complete and the antenna is locked onto the correct

satellite, the TracVision SF power switch may be turned off to avoid unnecessary

discharge of house battery power. Because the antenna LNB receives its power from

the IRD, the antenna will continue to receive the satellite TV signals and relay them

to the IRD.

NOTE:

If the antenna is unable to locate the desired satellite, refer to Section 4 -

"Troubleshooting" of the TracVision SF User's Manual for possible causes and

corrective actions.

031027

Содержание TREK 2005











































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды