G3013
3. Enter the CDN URL and then press enter
4. Enter the CDN Key and then press enter
5. Within the next scheduler period (once a minute) the system should notice the stream is
configured to broadcast to a CDN and start trying to push to it.
NOTES:
•
Consult your CDN provider for CDN URL and Key.
•
Only one CDN key can be assigned to a Stream.
Enabling Multicast Streaming:
Configuring a multicast UDP stream can be done through the console menu.
1. From the main menu press 7 and enter to go to
UDP Support
.
2. Press 1 and enter to
Add UDP Support to HDMI Input 0
3. Enter a valid multicast address udp://239.0.0.1 – udp://239.255.255.254
NOTE: it is recommended that the last 3 octets of the multicast address match the encoder’s IP
address.
4. Enter a valid multicast port number (e.g. 1234)
5. The encoder will then save the settings, begin multicasting, and return to the UDP Support
menu
NOTE: Other settings not covered in this document can be configured from the console menu.