Safa Media IRS-810L, Руководство пользователя

Страница: 7 / 12

12
Recording the general telephone conversation
1. Connect the audio cable in the Sound MAP Audio Cable Connector(LINE). Connect the adapter
and the telephone with the cable for telephone conversation recording. Then, connect the
handset cable of the telephone to the adapter.
2. Follow the same procedure as with the built-in microphone (See page 11).
It may be necessary to change the direction of installation of the adaptor (marked by (A)) depending
on your particular model of telephone.
2
Recording from external appliances (Audio, PC)
Set the recording speed (SP and LP), file, and VOR function before you start recording (see pages 15 and 16).
Sound can be distorted during playback if the volume control is set too high during recording.
1. Sound can be distorted during recording if the volume control of the external appliance is
set too high.
2. Connect one end of the audio cable to the Audio Cable Connector(LINE) of your Sound MAP
and the other end to the external appliance (Audio or PC).
3. Plug in the earphone to listen to the sound input from the external appliance.
4. The sound from the earphone may change slightly when recording starts. However, this will
not have any effect on the actual recording.
5. Follow the same procedure as with the built-in microphone (See page 11).
1
Recording with line-in
11
Recording with the Built-in microphone
Set recording sensitivity, file, VOR function and speed (SP or LP) before you start recording (see Pages 15 and 16).
1 Direct the product's built-in microphone towards the source of the sound.
2. Press the REC/PAUSE button to start recording. The red LED will illuminate (Figure 7 and 8).
3. Press REC/PAUSE button to stop the recording for a short moment. The red LED will flash.
(Figure 9)
4. Press REC/PAUSE button again to continue the recording. The red LED will light again.
5. Press the STOP/DEL button during recording or during standby mode to stop recording.
1
1. Connect the external microphone supplied with your Sound MAP to the Audio Cable
Connector(LINE).
2. Follow the same procedure as with the built-in microphone.
2
Voice Recording
(Figure 7) (Figure 8) (Figure 9)
Recording with the external microphone