SAF Holland FW16 Скачать руководство пользователя страница 4

4

XL-FW10084RM-en-US Rev B · 2014-01-29 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,  

and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.

Operation Check

HOLLAND

®

 LOCK TESTER

Figure 7

6. Operation Check

1.  Verify the proper operation of the fifth wheel by locking 

and unlocking the fifth wheel using a SAF-HOLLAND

®

 

Kingpin Lock Tester TF-TLN-5001 

(Figure 7)

.

2.  Set the lock tester tool on the fifth wheel, engage the “J” 

hook, and rotate the handle clockwise to lock 

(Figure 7)

.

3.  Pull the release handle forward, out and forward to hook 

on casting to unlock 

(Figure 8)

.

4.  Rotate the lock tester handle counter clockwise to unlock 

(Figure 7)

.

5.  After each attempt, verify that the fifth wheel is properly 

locked 

(Figure 8 and 9)

.

6.  After unlocking, verify that the handle ‘kicks off’ the unlock  

notch and moves into the ready to couple position.

IMPORTANT:

   Before using the fifth wheel, visually 

inspect all components of fifth wheel 
for proper operation while coupling and 
uncoupling fifth wheel with lock tester.

IMPORTANT: 

DO NOT use any fifth wheel which does 
not operate properly.

Failure to repair an improperly operating 
fifth wheel could result in tractor trailer 
separation which, if not avoided, could 
result in death or serious injury.

After a minimum of two (2) successful operational checks, the  
fifth wheel is ready for installation and return to operation.

LOCK ENGAGED 
AROUND KINGPIN

HOOK ENGAGED 
BEHIND LOCK

“J” HOOK

LOCK

UNLOCK

Figure 8

Figure 9

UNLOCK NOTCH

CLOSED POSITION

LOCK NOTCH BEHIND RIB

Содержание Holland FW16













Отзывы: