INTEGRA-W/INTEGRA-WS User Manual COMMAND LINE INTERFACE
SAF Tehnika JSC
70
Chapter 4: COMMAND LINE INTERFACE
Command line interface (CLI) is available via 4 individual interfaces:
-
Secure Shell (SSH);
-
Telnet;
-
Serial terminal;
-
Web GUI (System
Tools
Console, partial functionality)
The available CLI commands are found in “CLI commands” tables in appropriate Web GUI
page sections in
For SSH, Telnet or serial connection you can use any client supporting according interfaces
(e.g. PuTTY, Tera Term etc.).
CLI commands are not case sensitive.
A User can abbreviate commands and parameters as long as they contain
enough letters to be distinguished from any other currently available commands
or parameters.
Connecting to serial RS232 interface
In order to connect to Integra-W/Integra-WS serial terminal you will require USB cable with
USB Type B connector. Please refer to Chapter
To connect the PC to the RS232 management port, using serial terminal-emulation
), use the following parameters:
•
Baud rate: 115200
•
Data bits: 8
•
Parity: None
•
Stop bits: 1
•
Data flow control: None
Below are connection steps with
-
Windows
freeware software.
1.
and go to “Serial” category. Specify your COM port number you will be
using, change “Speed (baud)” to “115200” and “Flow control” to “None”:
Содержание Integra-W Series
