10
XL-AS20015BM-en-US Rev B · 2019-09-05 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,
and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
Installation Instructions
3. Installation Instructions
continued
19. Mount the warning light on the roadside approximately
six feet from the bottom of the trailer. Use appropriate
water proof sealant on warning light screw holes if surface
mounted. If a flush mount light is desired with hidden
wires, push the LED light out of the plastic housing. Use
the rubber grommet in a 3/4" diameter hole in the trailer
to install grommet and light. Surface mount illustrated.
(Figures 23 and 24)
.
20. Install the warning light decal directly above the warning
light
(Figures 23 and 24)
.
21. Install hubcaps to hubs if not pre-installed to your axles.
Torque hubcap bolts in a opposing pattern to 12-16 ft-lbs.
22. Install tire hoses by connecting the tire side first. Fittings
only need to be hand tight. Over-tightening can cause
damage to the seals inside the fittings and possible leaks.
Figure 24
Figure 23
