SAF-HOLLAND NoLube FW31 Series Скачать руководство пользователя страница 2

2

XL-FW10028UM-en-US Rev B · 2021-08-04 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF, 

and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.

Contents

Contents Page
Introduction ..............................................1

Notes, Cautions, and Warnings ..................1

Section 1 – General Safety Instructions .....2

Section 2 – Model Identification................3

Section 3 – Decal Requirements ................3

Section 4 – Fifth Wheel Intended Use ........4

Section 5 – Fifth Wheel Non-Intended Use ...4

Section 6 – Coupling Preparation ..............4

Section 7 – Coupling Procedures ...............7

Section 8 – Uncoupling Procedures .........10

Section 9 –  Positioning Sliding  

Fifth Wheels ..........................12

Section 10 – Fifth Wheel Maintenance ....15

Contents Page
Section 11 – Top Plate Removal  ..............15 

Section 12 –  Lube Plate Inspection.......... 16

Section 13 –  Fifth Wheel Lubrication .......16

Section 14 – Slide Base Lubrication..........18

Section 15 – Fifth Wheel Adjustment .......19

Section 16 –  Slide Base Adjustment 

(Traditional Sliders Only) .....21

Section 17 –  Upshock Cushions, Pocket  

Inserts and Brackets  

Inspection ...........................22

Section 18 – Top Plate Installation ..........22

Section 19 – Troubleshooting ..................23

Section 20 – Rebuild and Replacement Kits .. 25

NOTE:

  Includes additional information 

to enable accurate and easy  

performance of procedures.

IMPORTANT:

   Includes  additional 

information that, if  

not followed, could  

lead to hindered  

product performance.

Used without the safety 

alert symbol, indicates 

a potentially hazardous 

situation which, if not 

avoided, could result in  

property damage.

Indicates a potentially 

hazardous situation 

which, if not avoided, 

could result in minor or 

moderate injury.

Indicates a potentially 

hazardous situation which,  

if not avoided, could result  

in death or serious injury.

Introduction

This manual provides the information 

necessary for the proper operation and 

maintenance of HOLLAND

®

 FW31/XA-311 

(NoLube) and FW33/XA-331 (Low Lube) 

Series Fifth Wheels. 
Read this manual before using or servicing this 

product and keep it in a safe location for future 

reference. Updates to this manual, which are 

published as necessary, are available on the 

internet at www.safholland.us.
When replacement parts are necessary, 

SAF-HOLLAND

®

 requires the use of ONLY 

SAF-HOLLAND Original Parts. A list of 

technical support locations that supply  

SAF-HOLLAND Original Parts and an 

Aftermarket Parts Catalog are available 

on the internet at www.safholland.us or 

contact Customer Service at 888-396-6501.

Notes, Cautions, and Warnings

Before starting work on any SAF-HOLLAND 

fifth wheel assembly, read and understand 

all the safety procedures presented in this 

manual. This manual contains the terms 

“NOTE,” “IMPORTANT,” “CAUTION,” and 

“WARNING” followed by important product 

information. These terms are defined as 

follows:

Содержание NoLube FW31 Series

































Отзывы: