SAF-HOLLAND Holland ELI RK-10855-L, Руководство по установке

Страница: 11 / 32

11
English
Installation Instructions
XL-FW10064BM-en-US Rev A · 2011-12-02 · Amendments and errors reserved. © SAF-HOLLAND, Inc.
8. Kingpin Sensor Bracket Installation
1. Mount the kingpin sensor bracket to the fifth wheel
(Figure 19) with the thread-cutting screws. Torque
screws to 12 ft.-lbs. DO NOT overtighten the screws.
DO NOT use air or impact tools.
NOTE: The kingpin sensor bracket mounts in the same
position for both left-hand, right-hand and air
release fifth wheels.
2. Assemble the cable ties and spring clips together before
pressing the clips onto the casting (Figure 20) .
3. Route the harness on the fifth wheel as shown (Figure 21) .
Use clips and cable ties to fasten the harness to the fifth
wheel ribs in the locations shown
(Figure 21) .
NOTE: A left-hand release fifth wheel is shown here. For
a right-hand release, the cam sensor bracket and
wiring are mirrored on the opposite side of the
top plate.
4. Re-install the fifth wheel top plate onto the tractor.
Figure 20
Figure 21
Figure 19
$"#-&5*&4"/%$-*14
$0//&$503
KINGPIN
SENSOR
BRACKET
THREAD-CUTTING
SCREWS
CABLE TIE
$"#-&5*&
413*/($-*1