SAF-HOLLAND Holland DB-610-30 Скачать руководство пользователя страница 8

8

XL-DB20012UM-en-US Rev – · 2015-07-29 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF, 

and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.

Ratings, SAE and General Information

4.  Load Ratings

Maximum GTW: 45,000 lb. (20,412 kg)
Maximum Vert. Load: 9,000 lb. (4,082 kg)

NOTE:

   When used for hinged  

tongue trailer applications  

Max Vertical: 500 lb. (227 kg) 

Max GTW: 85,000 lb. (38,555 kg)

5.  Towing Applications

For general on/off road towing. For severe 

off-road applications, reduce the above 

capacities by 25%.

IMPORTANT:

  Off-road refers to terrain 

on which a tow/towed 

vehicle will operate 

that is ungraded, rough 

or undulating, with no 

maintained travel surface, 

generally considered to 

NOT be part of the public 

road system. Examples 

include agricultural fields, 

construction sites, utility 

right-of-way, temporary 

logging roads, and what is 

commonly referred to as 

'two-track' roads.

6.  General Information

1.  DO NOT modify or add to the product.
2.  This product is covered by  

SAF-HOLLAND’S

®

 Commercial  

Warranty. SAF-HOLLAND

®

 reserves  

the right, without giving prior notice,  

to change specifications and dimensions 

as designs are altered or improved.

3.  Inspect the coupling device on the tow 

vehicle and trailer for proper operation. 

DO NOT use any coupling device that 

DOES NOT operate properly.

4.  It is the responsibility of the user to 

become familiar with coupling and 

uncoupling procedures that are provided 

by various governments, industry 

associations and mating component 

manufacturers instructions.

7.  General Safety Information

This equipment MUST NOT be used in a 

careless manner.

During Operation:

1.  Maintain adequate vertical (tongue) 

load to properly control the towed unit 

(generally 10% of maximum GTW) but 

DO NOT exceed the rated capacities.

2.  DO NOT damage the coupling 

components. Be particularly careful 

during coupling and uncoupling.

3.  NEVER strike any part of the item with  

a steel hammer.

Содержание Holland DB-610-30

















Отзывы: