2
XL-DB20020UM-en-US Rev A · 2019-06-05 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,
and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
Contents
Contents Page
Introduction .............................................. 2
Warranty ................................................... 2
Notes, Cautions, and Warnings .................. 2
Section 1 – General Safety Instructions ..... 3
Exploded View and Parts List ..................... 4
Section 2 – Drawbar Eye Dimensions......... 5
Section 3 – Load Ratings ........................... 6
Contents Page
Section 4 – Towing Applications ................ 6
Section 5 – General Information ................ 6
Section 6 – General Safety Information ..... 6
Section 7 – Mounting Instructions ............. 7
Section 8 – Operating Instructions ............ 7
Section 9 – Maintenance ........................... 8
Introduction
This manual provides information necessary
for the proper operation, maintenance, and
inspection of the SAF-HOLLAND
®
drawbar.
NOTE:
For HOLLAND
®
replacement
components contact
SAF-HOLLAND Customer
Service at 1-888-396-6501.
Warranty
Refer to the complete warranty for the
country in which the product will be used.
A copy of the written warranty can be
downloaded from our SAF-HOLLAND
®
website (www.safholland.com).
Notes, Cautions, and Warnings
Read and understand all of the procedures
presented in this manual before starting
any work on the pintle hook.
NOTE:
In the United States, work shop
safety requirements are defined by
federal and/or state Occupational
Safety and Health Act. Equivalent
laws could exist in other countries.
This manual is written based
on the assumption that OSHA or
other applicable employee safety
regulations are followed by the
location where work is performed.
Proper tools MUST be used to perform the
mounting and maintenance procedures
described in this manual.
This manual contains the terms “NOTE”,
“IMPORTANT”, “CAUTION”, and “WARNING”
followed by important product information.
These terms are defined as follows:
NOTE:
Includes additional information
to enable accurate and easy
performance of procedures.
IMPORTANT:
Includes additional
information that if
NOT followed could
lead to hindered
product performance.
Used without the safety alert
symbol, indicates a potentially
hazardous situation which,
if not avoided, could result
in property damage.
Indicates a potentially
hazardous situation which,
if not avoided, could result
in minor or moderate injury.
Indicates a potentially
hazardous situation which,
if not avoided, could result
in death or serious injury.
