SAF-HOLLAND Holland DB-040DQ1 Скачать руководство пользователя страница 10

Страница: 10 / 12

XL-DB20009UM-en-US Rev – · 2015-07-29 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,

and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.

Maintenance

9. Maintenance

For proper performance, the following

maintenance steps should be performed

every 30,000 miles (48,280 km) or three

(3) months, whichever comes first.

Failure to inspect and

maintain the drawbar may

result in separation of the

pintle hook and drawbar,

which, if not avoided,

could result in death or

serious injury.

1. Clean and check for wear, damaged,

or missing parts, and a secure mount.

Inspect for worn, damaged or missing

parts. Replace as required using only

Genuine SAF-HOLLAND

parts.

2. Inspect, in particular, the coupling

contact area of the drawbar. Inspect

for any nicks, gouges and deformation,

which may interfere with or affect the

safe use of the drawbar. If cracks are

visible, replace.

3. Using calipers or the SAF-HOLLAND

drawbar gauges

TF-11887, measure

the cross section of the drawbar eye.

Replace the complete product when

wear exceeds 0.125" (3.18 mm) from

the original surface profile. For original

profile dimension (Refer to Section 2,

page 4 Dimensions).

4. Inspect the drawbar fasteners. For bolted

connections refer to proper torque in

Section 7. In addition to being a safety

hazard, a loose drawbar will cause

excessive "chucking" and rapid wear.

Reinstall or replace any drawbar which

is NOT securely mounted.

Содержание Holland DB-040DQ1













Результаты поиска

Содержание Holland DB-040DQ1

Отзывы:

Похожие инструкции для Holland DB-040DQ1

Бренды по названию

Популярные бренды

SAF-HOLLAND Holland DB-040DQ1, Руководство пользователя

Результаты поиска

Содержание Holland DB-040DQ1

Отзывы:

Похожие инструкции для Holland DB-040DQ1

Бренды по названию

Популярные бренды