Saf-Fro DVU W500, Инструкция по эксплуатации и обслуживанию

Страница: 18 / 165

EN
17
5 - MAINTENANCE
Twice a year, according to how often the set is used, inspect :
The cleanliness of the wire feeder.
The electrical and gas connections.
Never clean or make repairs on the inside without first making sure that the set has been disconnected from the mains. Remove the wire
feeder panels and vacuum up any dust and particles presente.
Always use a plastic nozzle when cleaning these parts to avoid any damage.
Carefully vacuum the electronic circuits, taking care to ensure that the nozzle does not damage the components.
If the wire feeder develops a malfunction, before trying to diagnose the problem, perform the following steps, check :
 the electrical connections on the power, control and supply circuits.

the condition of the insulation, cables and lines.
At each startup of the welding set and before any operations, check technical sale service:

that power terminals are not poorly tightened
 that the connections are correct

the gas flow
 the condition of the torch

the kind and diameter of the wire
5.1. WIRE ROLLERS AND GUIDES
Under normal working conditions, these accessories will give you long service life before requiring replacement.
However, early wear or clogging can be caused by sticky deposits.
To reduce the risk of this happening, check the cleanliness of the plate at regular intervals.
The motor reducing gear set is maintenance-free.
The mounting of the rollers on the deck requires an adapter ref. W000277338.
5.2. WIRE-FEED PLATE WEAR PART
The wearing parts of the wire feeder, whose role is to guide and advance the welding wire, must be adapted to the type and diameter of the welding wire
used.
Their wear may affect the welding results. Replace them if needed.
wire guide input roller
wire guide
intermediate
wire guide output
steel
0,6 / 0,8
0,8 / 1,0
W000277333
W000305125
W000267598
W000279645
W000277335
W000277335
0,9 / 1,2
1,0 / 1,2 W000277008
W000267599 W000277335
W000277335
1,2 / 1,6
1,4 / 1,6 W000305126
W000277009 W000277336
W000277336
Flux Cored
Wire
0,9 / 1,2
W000277333
W000277335
1,2 / 1,6 W000277335
1,4 / 1,6 W000277336
ALU 1,0 / 1,2 ALUKIT W000277622
1,2 / 1,6 ALUKIT W000277623
Possible use of steel rollers ALU with steel wire and coated wire.