
61
14. Faults
Malfunctioning
Cause
Solution
Wood too moist
•
Check; max. residual moisture 20%
Wrong fuel
•
Use only the fuel allowed for the appliance
Chimney draught too weak:
(Minimal pressure: 10Pa at the heating
gas connector pipe)
•
Check the air-tightness of the outlet
•
Light a kindling fire in the chimney
•
Close any open doors of other appliances
connected to the chimney.
•
Close the cleaning hatches of the chimney
•
If necessary, clean the connector pipe
The fire is not burning well
Not enough combustion air
•
Check the diameter of the circulation
•
Check the ventilation installation of the
residence or cooker hood, and open a
window if necessary
Wood too moist
•
Check; max. residual moisture 20%
Wrong fuel
•
Fuel not small enough –
•
Use only the fuel allowed for the appliance
Too much wood has been added
•
Do not add more than 2 to 3 pieces of wood
Glass soon gets dirty
Not enough combustion air
•
Connect the combustion air pipe directly to
the appliance, and convey combustion air to
the circulation grate or directly to the outside
•
Check the diameter of the circulation
•
Check the ventilation installation of the
residence or cooker hood, and open a
window if necessary
A lacquer odour is emitted and
smoke develops
Curing of the primer used
•
Rapid heating of the heating appliance will
result in an odour being given off . This will
dissipate after a while
Condensation
High temperature difference
•
Open the door slightly during the heating
phase. Do not leave the appliance
unattended during this phase!
Chimney draught too weak:
(Minimal pressure: 10Pa on the outlet
connector pipe)
•
Check the air-tightness of the outlet
•
Light a kindling fire in the chimney
•
Close any open doors of other appliances
connected to the chimney.
•
Close the cleaning hatches of the chimney
•
If necessary, clean the connector pipe
Inconvenience caused by smoke
Fuel has not been burnt up completely
•
In principle, fuel should be topped up only
when no more orange flames are visible in
the stove.
Chimney fire
Wrong combustion
overload
wrong or no maintenance
•
Close down air enterance
Contact the fire department
If there is still backdraft of fluegas due to bad weather conditions 15 minutes after ignition, you should
stop ignition and wait for improvement in the weather.
Содержание ePure
Страница 15: ...15 ...
Страница 30: ...30 13 Pièces de rechange Vous pouvez obtenir des pièces de rechange auprès de votre revendeur ...
Страница 45: ...45 ...
Страница 60: ...60 ...